Feeds:
Posts
Comments

Archive for February, 2009

OMG I dyed the Malabrigo

Talk about pucker factor.

Malabrigo is not something I want to mess up.

I was trying to replicate this wool, which I kettle dyed for my last yarn swap.

tnn-yarn-swap-v2-potc-wool

This is what I got.

dyeing-malabrigo

Not as bluey, but I am still pleased with it.

Now for the shocking part.  It’s for pants for the boy for winter.

Deranged, I know.  Maybe someone needs to talk me out of it. 😉

Read Full Post »

DIY Sock Blockers for the Scrapbooker

When you knit socks, you suddenly have a need for sock blockers, but I needed some r.i.g.h.t n.o.w.  And I didn’t want to pay out a chunk of change to get just one size either.

Found this simple tutorial on ravelry for DIY sock blockers, which uses placemats, cut to the necessary shape or size you need. I was worried that if you cut the placemat, any laminated paper on the inside would get damp while blocking your socks. Plus, I didn’t want to buy nice placemats, just to chop them up.

So I modified, and used what I had, and got a variety of styles and colours and sizes that I never could have gotten with just a placemat.

I dug out some much neglected scrapbooking paper, cut it to the size I needed, laminated and trimmed. And Voila!!!

These in a size 10.

sock-blockers-blue-green

And these in size 9 (double sided paper).

sock-blockers-reds

And double sided with four different, coordinating  papers.

sock-blockers-blue-and-pink-front

sock-blockers-blue-and-pink-back

Not perfect, but functional, and practical.

sock-blockers-in-use

What does Gordon say?  DONE!

Read Full Post »

Mermaidia

So, I mentioned I learned Magic Loop and Toe Up Socks in this post. I love knitting socks, but ever since knitting my Wicked I’ve found I enjoy being able to try things on as I am knitting them.  You are able to get a much better fit. Plus if you have to frog back, it’s easier to do that while in the middle of knitting it,  than it is having a finished garment that just doesn’t fit properly.

Anyway, I took the bulls by the horn, and cast on for some socks, but wanted something a bit fancier than just plain stocking stitch, so I frogged it and started over.  I took my favourite dishcloth pattern, and turned it into a sock pattern.

mermaidia-sock

mermaidia-sock-21

I was so determined to use my Regia Bamboo Colours, but it’s a little hard to see the lacework.  So I knit up some Vintage Purl Sock Wool in Chlorophyll.  These are a gift.  A very belated Christmas present, but better late than never.  The semi-solid dyeing shows the pattern in much more details.

sock-mermaidia-chlorophyll

I had to modify a bit as the wool knit tighter than the Bamboo did.  Plus, I did an anklet height, so only did four lace pattern repeats after the heel flap, and a plain cast off.  I called the pattern Mermaidia based on both origin of the stitch pattern and because it looked like a gathering place for Mermaids.

And one a little closer, showing the lacework.

sock-mermaidia-chlorophyll-close

The lighting, plus my novice photo editing skills don’t do the colour justice.

So, here is the pattern.  It will be uploaded to Ravelry as well. Special thanks to the lovely Morag of Vintage Purls, for helping me get my head around doing the heel flap in reverse.

This sock when knit in gauge, should give you a US Woman’s shoe size of 8 – 9.  It can be easily lengthened or shortened by adding rows in the foot.  It is designed to use Magic loop. It can be done on DPNs if you wish, just be careful with the pattern, as there are more stitches on the top of the sock than there are on the bottom.

Gauge:

9 st x 12 rows per inch in stocking stitch

Materials needed:

100g 4ply Regia Bamboo Colour

2.50mm 80cm circular needle (I used Knit Picks)

3 place markers/stitch markers.

Abbreviations:

k = knit

p = purl

sl = slip purlwise while keeping yarn at the back

kfb = knit into front of loop and then into back of loop

yf = bring yarn to the front of the work as if to purl

psso = pass slipped stitch over

m1 = This is the M1L from knittinghelp.com: Using the left needle, lift the purl bar between the stitches on your needles and knit into the back of the loop

k2tog = knit two together

p2tog = purl two together

pm = place marker

rm = remove marker

slm = slip marker from left to right needle

BarInc = : Using the left needle, lift the purl bar between the stitches on your needles to create a new stitch.

Cast on toe:

Using Judy Becker’s Magic Cast-On or Turkish Cast On, cast on 24 stitches (12 on each needle) and knit one round.  Place marker (or pull tail yarn to the outside of the work) to mark the beginning of the round.

Toe Increases:

Round 1: Kfb, knit to next to last stitch on needle one, kfb, k1.  Repeat on needle two.

Round 2: Knit.

Repeat rounds 1 and 2 nine times for a total of 10 sets of increases.  You should have 32 stitches on each needle.

Round 1: Knit 16, M1, K to end of round.

Round 2: Knit

You should now have 33 stitches on needle one, and 32 on needle two.  The extra stitch on needle one is to center the lace pattern.

Start the lace pattern here for needle one only.  Knit all stitches on needle two. Work 9 pattern repeats, or until sock is 3.5 inches less than the length of your foot from toe to heel.

Lace pattern:

Row 1: k1,*yf, k2 , sl1-k2tog-psso, k2, yf, k1* (x4), knit to end of round

Row 2: k

Row 3:k2,*yf, k1, sl1-k2tog-psso, k1, yf, k3* (x3), yf, k1, sl1-k2tog-psso, k1, yf, k2, knit to end of round.

Row 4: k

Row 5: k3, *yf, sl1-k2tog-psso, yf, k5*(x3), yf, sl1-k2tog-psso, yf, k3, knit to end of round.

Row 6: k

Gusset Increases:

I will now interchangeably refer to needle one as the instep and needle two as the insole. Continuing the lace pattern on needle 1 (instep), work gusset increases on needle two (insole) only.

Round 1: k1, pm, m1, k30, m1, pm, k1

Round 2: knit

Round 3: k1, m1, slm, k32, slm, m1, k1

Round 4: knit

Round 5: k1, m1, knit to marker, slm, k32, slm, knit to last stitch, m1, k1

Round 6, knit

Work rounds 5 and 6 a total of 10 times, ending in a knit row.  You should now have 12 gusset stitches on either side of your place markers, and the 32 insole stitches between the place markers.

Reverse Heel Flap:

Knit in pattern across the instep (needle one).  You will now be working back & forth on the insole needle only (needle two).  Do not wrap your stitches when you turn.

Row 1: k12, slm, k32, turn

Row 2: sl1, p31, turn

Row 3: sl1, k30, turn

Row 4: sl1, p29, turn

Row 5: sl1, k28, turn

Row 6: sl1, p27, turn

Row 7: sl1, k26, turn

Row 8: sl1, p25, turn

Row 9: sl1, k24, turn

Row 10: sl1, p23, turn

Row 11: sl1, k22, turn

Row 12: sl1, p21, turn

Row 13: sl1, k20, turn

Row 14: sl1, p19, turn

Row 15: sl1, k18, turn

Row 16: sl1, p17, turn

Row 17: sl1, k16, DO NOT TURN. You will now knit in the 8 abandoned short row stitches that are on your left needle as follows: *BarInc, k2tog* (x8). You will now pick up the first gusset stitch as such: rm, sl1 to right needle, pm back on left needle, pass next to last stitch on right needle over the slipped stitch, turn.

Row 18: sl1, p23, *BarInc, p2tog* (x8), rm, sl1 to right needle, pm back on left needle, pass next to last stitch on right needle over the slipped stitch, turn.

Row 19: sl1, k31, rm, sl1 to right needle, pm back on left needle, pass next to last stitch on right needle over the slipped stitch, turn.

Row 20: sl1, p31, rm, sl1 to right needle, pm back on left needle, pass next to last stitch on right needle over the slipped stitch, turn.

Repeat rows 19 and 20 ten more times, until all the gusset stitches have been knit in, ending in a purl row, turn.

You will start the lace pattern now on needle two (which is now the back of the leg). For this row only, knit lace pattern on needle 2 as follows:

yf, sl1, k1, sl1-k2tog-psso, k2, yf, k1, yf, k2, sl1-k2tog-psso, k2, yf, k2tog, yf, k2, sl1-k2tog-psso, k2, yf, k1, yf, k2, sl1-k2tog-psso, k1, sl1, yf.   You will now have 31 stitches on needle two for the remainder of the sock, instead of 32.  You should now be back at the beginning of the round, ready to work round 2 of the lace pattern.  Work round 2 in the following fashion ONCE, and then continue in original lace pattern, working lace on both needles one and two.

Round 2 (do only this one time): sl1, k31, sl1, knit to end of round. Be sure not to accidently knit your yf and your sl together at the beginning and end of needle two.

TIP: Because there are yf increases at the beginning and end of needle two in round 1 of the lace pattern, it is very important to keep these as tight as possible, so as not to create ladders in your work from the areas between needles.

Continue in pattern, for 10 pattern repeats, or to desired length.

Cuff:

Work 10 rows in twisted rib: (k1tbl, p1) x 32

OR work an alternate cuff of 12 rounds of 2×2 rib, followed by a normal cast off.

Cast off:

Picot cast off (or use your preferred cast off method). *Cast on 2 stitches using cable cast on, cast off 4 stitches in the usual manner. Move last stitch you knit from the right needle to the left needle, and repeat from *.

Please note, this pattern is free for personal use.  Not commercial use of this pattern without prior approval.  Copyright 2009 Christine Jeffery

PDF download is here:

Mermaidia Sock Pattern

Read Full Post »

Berry Quick Book Bag

Well, I got KT5 off to her first day of school on Wednesday.  Gosh it’s hard believing that she is old enough for school already.  But her raw enthusiasm for being there added some much needed excitement to the mix.

So, we got to her class, with a big bag of supplies in tow.  She has so many different work books that it took a little while to get them all put in the proper sorted baskets, along with all the pencils, glue, tissues, hats, etc.  And then I got to her reading log, which I didn’t see a basket for, so I gave it to her teacher, who then asked, “Does KT5 have a book bag?”

DAMN!  Guess what I forgot.

I had planned to make one, but just completely forgot about it during the massive duraseal-a-thon that was 23 books and a few hours in length.

So on Thursday, one little boy decided to have an easy nap, so I whisked into the craft room, grabbed some canvas and Poly PUL, along with some FOE and made this.

book-bag

No digging the box to find her bag, I tell ya!  It stands out!

And the best part?  The label!  My lovely friend Beck of Ecobubs, Crunchy Crafter and Rebecca Gunn Designs, surprised me with these a couple weeks ago.  Sorry for the pic, but my camera really is on its last leg!

book-bag-label

Isn’t it pretty!  Thanks Beck.

And welcome to school KT-FIVE YEARS OLD!!!

Read Full Post »

Yarn Porn

I gate crashed a knitters weekend a couple of  weekends ago with some friends from around the lower North Island.  It was put together by the amazing James from Joy of Yarn in Greytown and featured the most awesome Morag of Vintage Purls.  It was a great workshop, teaching toe up socks using Magic Loop.

Here is my little workshop sock.

sock-workshop-sock

And this is what snuck in my bag for the trip home.  From Left to Right, Rosewood, Diva, Joy, Dolly and Bluhu.  All are Limited Editions ones except Joy, which Morag makes just for James’ store.

vp

I came home with some Regia Bamboo as well, and started these.

socks-toe-up-bamboo-mermaidia

I wrote up the pattern, but have a few friends checking it over, so will post it soon.

In the mean time, here is more yarn porn.

This one is Patonyle, kettle dyed in pinks and reds.

dyeing-sex-on-fire

Patonyle again, in reds and blacks.  Both of these are supposed to be secrets, but will reserve the rest of the items associtated with these for another post.

dyeing-postmortem

This one is an 8ply, called Mia from Knitworld.  Dyed with procion in Burgundy, Fuchsia, Magenta and Bubblegum.  Love how this one turned out!

dyeing-pink-mia

These ones are various cotton and bamboo mixtures.  A bit of random dyeing going on, if you can’t tell from the top one, which is what happens when kettle-dyeing goes VERY wrong.

dyeing-cotton-and-bamboo

Anyway, it’s always good to find out what works and what doesn’t.

Read Full Post »

Well, once again, I am a bit behind.  I wouldn’t be me if I weren’t late with everything.

These are the placemats and matching table runners I made my folks and DH’s Mum.  It’s a pattern out of New Noel.  This would be the first time I’ve done applique. And I have to say, that I do NOT like qpplique.  At least not on small, thin letters.

I wanted them to be traditional reds and greens since they were for parents.  The quilter in me didn’t talk loud enough, so the idiot in me did stitch and turn for the edges.  Wrong-o.  The quilter should have spoken louder.  Next time maybe.

Anyway, here they are.  The placemats, a set of four.

sewing-placemats

The matching tablerunner.  I think this is much more effective than the placemats, though if I did it again, I would do the borders in green instead of red.  Live and learn.

sewing-tablerunner

A closer picture of the snowflakes.  This is where I lost the hair on both sides of my head.  Metallic thread is so beautiful, but it SUCKS to work with.  The snowflakes alone look me h.o.u.r.s!!!!!

sewing-tablerunner-snowflake-close

And here is where I admit that I can still admire these from where I am sitting.  That is correct, I am not done with my Christmas crafting yet, so here they still sit.  At least they will be there in time for next Christmas!!

Read Full Post »